Процес на обличане на полиметална руда на Таджикистан
Tajikistan is located in the ancient Asian mineralization area, with good mineralization conditions and great resource potential. At present, there are more than 600 metal and non-metal deposits that have been explored and are to be developed. The main minerals are coal, uranium, gold, silver, lead, zinc, antimony, mercury, tin, rock salt, etc. The Вторичните минерали са масло и природен газ, мед, молибден, желязо, флуорит, фосфор и др. .
Tajikistan is located in the Paleo-Asian metallogenic belt, with good mineralization conditions and great resource potential. Currently, there are more than 600 metal and non-metallic deposits that have been explored and are yet to be developed. The main minerals are coal, uranium, gold, silver, lead, zinc, antimony, mercury, tin, rock salt, и т.н. . Вторичните минерали включват масло, природен газ, мед, молибден, желязо, флуорит, фосфор и др. .

Минерален състав Метални минерали: главно сулфидни руди (халкопирит, галена, сфалерит, пирит), съдържащ схелит (cawo₄) и следи количества естествени златни и сребърни минерали . ганг -минерали: Quartz, калцит, флуит и т.н. minerals. Embedding characteristics: The mineral particle size is uneven, some scheelite is fine-grained impregnation (0.02~0.1mm), and sulfide minerals are mostly medium-fine aggregates. 2. Difficulties in sorting Sulfide minerals have similar floatability: The flotation separation of Медните, оловни и цинкови сулфидни руди изискват прецизен контрол на условията на реагент . Шелитът има сходна плътност на гангто: варовилно ганг, като флуорит и калцит пречи на повторния подбор и флотацията на Шелит. Възстановяване на благородни метали: Златото и среброто често се увиват в сулфидни минерали и трябва да бъдат напълно разделени от фино смилане.

2. Основен дизайн на процеса 1. смачкване и смилане на триетапното раздробяване: грубо раздробяване: дробила на челюстта смазва суровата руда до по-малка или равна на 150 мм . Средно раздробяване: Cone Crusher произвежда частици, по-малко или равни на 50 mm {. фино раздробяване: с високо налягане мелница дотолкова 10mm .

Two-stage closed-circuit grinding: First stage grinding: ball mill and spiral classifier are used together to grind to -200 mesh, accounting for 60%~65%, and sulfide ores are floated first. Second stage grinding: the flotation tailings are re-grinded to -400 mesh, accounting for 75%~80%, releasing fine-grained scheelite and Precious Metals . 2. Предварително подбор и изхвърляне на тежко средно разделяне: Тежкият среден циклон се използва за груба зърнеста руда (+2 mm), а плътността на разделяне е настроена на 2.9-3.1 g/cm³, и 30% -40% от отпадъците от нискоздрав, се прекратява в Advent {{{{2.9-3.1 g/cm³, и 30% -40% от отпадъците от нискоздрав, се прекратява в аванс {{{{{2.9-3.1 g/cm³, и 30% -40% от отпадъците от нискоздрав Разделяне на смесена флотация Десулфуризация: Регулиране на агент: вар (рН 11 ~ 12) инхибира пирит, а меден сулфат активира спахалерит . Колектор: Бутил Ксантат + Черна медицина Комбинация за събиране концентрат .

Copper-lead-zinc separation: Zinc suppression and copper-lead flotation: lime + sodium cyanide suppress sphalerite, and float copper-lead mixed concentrate. Copper-lead separation: After activated carbon dedoping, potassium dichromate suppresses galena and floats chalcopyrite. Zinc flotation: sulfuric acid activates sphalerite, butyl xanthate captures, and zinc concentrate is produced. 4. Scheelite recovery flotation process: Roughing: sodium carbonate slurry is adjusted to pH 9-10, water glass suppresses silicate, oleic acid soap captures scheelite, and heated to 35-40℃to enhance selectivity. Concentration: 4~5 times of concentrating, gradually increase the concentration of water glass to suppress residual fluorite. Gravity selection auxiliary: For the coarse-grained scheelite (+0.1mm) in the flotation tailings, a shaking table is used for supplementary recovery.

Precious metal recovery sulfur concentrate reprocessing: Grind the gold-containing sulfur concentrate to -400 mesh, accounting for 90%, and use cyanide leaching (NaCN concentration 0.05%~0.1%) to recover gold and silver, and replace zinc powder to obtain precious metal mud. 6. Tailings treatment concentration и дехидратация: След като опашките се утаяват в концентратора, те се дехидратират чрез вакуум филтър и се съхраняват филтърните питки . Връщане на водата на водата: Водата за преливане се връща към процеса на смилане и флотация, а новата вода се използва само за реактивна подготовка. Iii. Диаграма на потока на процеса
Сурова руда → Тристепенно раздробяване → преди екраниране → Тежка средна изхвърляне → Смилане на първи етап
→ Сулфидна руда Смесена флотация → Мед, Олово и цинк Разделяне → Меден концентрат, оловен концентрат, цинков концентрат
↓
Опашъни → Смилане на втори етап → Флотация на схелити (грубо концентрация) → Концентрат от волфрамов
↓
Окончателни опашки → Концентрация и дехидратация → Пазени езерни хранилища
IV. Key Operation Points Grinding particle size control: The first stage of grinding needs to ensure that the sulfide minerals are fully dissociated, but avoid over-grinding to cause mud interference. The second stage of grinding aims at the dissociation of scheelite, and strictly controls the classification efficiency of the cyclone. Optimization of the reagent system: When flotating sulfide ores, the amount of sodium cyanide needs to be dynamically adjusted according to the zinc content in the ore to prevent excessive inhibition. In the flotation of scheelite, the ratio of water glass to oleic acid soap is recommended to be determined through laboratory tests, usually 3:1~5:1. Temperature management: The flotation of scheelite needs to maintain the pulp temperature Greater than or равен на 35 градуса, което може да се регулира чрез директно отопление на пара или предварително загряване на вода .
V. Summary The separation of polymetallic ores in Tajikistan needs to take "preferential flotation of sulfide ores-tailings and then scheelite" as the core process, and achieve efficient separation of polymetallics through stage grinding and gradient recovery. Focus on controlling the conditions of sulfide ore separation reagents and the flotation temperature of scheelite. The traditional process is mature and reliable, and is suitable for local polymetallic deposits dominated by sulfide ores. It is recommended to conduct mineral processing tests in advance according to the specific ore composition and adjust the process parameters accordingly.







